Recreational Vehicle

US Transportation & RV Industry (Active) Chlorine Dioxide Standard Protocols:

30′ to 40′ RVs

Vaporing for Deodorization: 100 Grams ClO₂ in 32 oz water (with aerator) treats up to 500 ft² with 10′ ceiling
Vaporing for Mold Removal: 100 Grams ClO₂ in 32 oz water (with aerator) treats up to 100 ft² with 10′ ceiling
Liquid: (M) 100ppm or (H) 500ppm on porous and non-porous surfaces
Tank & Line: 50ppm

Proven safe on fiberglass, steel, plastics, vinyl, rubber, upholstery, wood, marble, electronics and wiring.

Using Reset On Recreational Vehicles

Chlorine Dioxide (ClO₂) safely removes and deodorizes pungent organic and chemical based odors from all porous and non-porous surfaces; including furniture, upholsteries, carpets, bedding, draperies, clothing, kitchen, heads, bunks, sporting and scuba equipment, refrigerators, coolers, tank and line systems.

Removes cigarette, cigar and marijuana smoke, mold and mildew, chemical masking agents, food, garbage, pets, bio-fluids and anything else you can imagine!

Reset ClO₂ may be generated and used as either a VAPOR or LIQUID.

Reset ClO₂ features: No Rising or Wiping Required, Non-Masking, Non-Staining, Non-Corrosive, No Fragrances, No VOCs, Near Neutral pH, No Enzymes.

STEP 1: Reset Impacted Surfaces with ClO₂ Liquid

Simply add pre-measured, color coded Reset CLO₂ Tablets to water and ANY UNIVERSAL SIZE opaque container or dispersion tool to generate desired concentration or application requirement.

Apply Reset (M) 100ppm or (H) 500ppm liquid into the atmosphere and onto all porous & non-porous surfaces with a mop, sponge, pump sprayer or non-thermal fogger.

Step 1 is often not required when using Reset Vapor Mold Removal Level.

STEP 2: Reset Environment & Its Contents with ClO₂ Vapor

3 to 24 hours treatment time depending on severity of issue

Create a confined space.

Select Reset Deodorize Level or Mold Remove Level.

Simply add pre-measured, color coded Reset CLO₂ Tablets to water and either a 16 oz. cup or 5 gallon bucket (with Aerator).

Follow easy to understand product Vapor activation instructions and support videos.

STEP 3: Tank & Line Cleaning (Optional)

Black, Grey and Drinking Water

Drain Tank. Refill System with 20% of total tank capacity with water.

Generate a Reset Liquid concentrate and add it to the tank system.

Wait 30 minutes, flush & quick rinse the system.

Use pre-sized Reset Tablets. See Tank & Line chart.

Tank & Line Generation Table
Total Tank Capacity	Reset Tablet Required
5-10 Gallon	1 Green Tablet
10-20 Gallon	2 Green Tablets
55 Gallon	1 Red Tablet
110 Gallon	2 Red Tablets
240 Gallon	4 Red Tablets