Using Reset On Boat and Marine
Biodegradable. Non-Staining. No Fragrance. No VOC’s. No Residuals. No Rinsing/No Wiping required.
STEP 1: Reset Impacted Surfaces with ClO₂ Liquid
Simply add pre-measured, color coded Reset CLO₂ Tablets to water and ANY UNIVERSAL SIZE opaque container or dispersion tool to generate desired concentration or application requirement.
Apply Reset (M) or (H) liquid into the atmosphere and onto all porous & non-porous surfaces with a mop, sponge, pump sprayer or non-thermal fogger.
Step 1 is often not required when using Reset Vapor Mold Removal Level.
STEP 2: Reset Environment & Its Contents with ClO₂ Vapor
3 to 24 hours treatment time depending on severity of issue
Create a confined space. Select Reset Deodorize Level or Mold Remove Level. Follow Vapor activation instructions.
Open hatches to air-out CLO₂ from the confined space before reoccupying.
STEP 3: Reset Tanks & Lines
Black, Grey & Drinking Water
Use pre-sized Reset Tablets. See Tank & Line Chart.
|Tank & Line Generation Table|
|Total Tank Capacity||Reset Tablet Required|
|5-10 Gallon||1 Green Tablet|
|10-20 Gallon||2 Green Tablets|
|55 Gallon||1 Red Tablet|
|110 Gallon||2 Red Tablets|
|240 Gallon||4 Red Tablets|