US Restoration Industry (Active) Chlorine Dioxide Standard Protocols:
- Vaporing for Deodorization: 100 Grams ClO₂ in 32 oz water (with aerator) treats up to 500 ft² with 10′ ceiling
- Vaporing for Mold & Smoke Removal: 100 Grams ClO₂ in 32 oz water (with aerator) treats up to 100 ft² with 10′ ceiling
- Liquid: (M) 100ppm or (H) 500ppm on porous and non-porous surfaces
Proven safe on uniforms, tactical equipment, steel, plastics, vinyl, rubber, upholstery, wood, marble, electronics and wiring.
Using Reset In Law Enforcement Facilities
Chlorine Dioxide (ClO₂) safely removes and deodorizes pungent organic and chemical based odors from all porous and non-porous surfaces in Law Enforcement Facilities (offices, meeting rooms, locker rooms, patrol cars, holding cells).
Removes bio-fluids, mold and mildew, chemical masking agents, food & garbage odors and anything else you can imagine!
Reset ClO₂ may be generated and used as either a VAPOR or LIQUID.
Reset Tablets are pre-measured to generate use concentrations in all universal sized containers. Reset ClO₂ features: No Rising or Wiping Required, Non-Masking, Non-Staining, Non-Corrosive, No Fragrances, No VOCs, Near Neutral pH, No Enzymes.
STEP 1: Reset Impacted Surfaces with ClO₂ Liquid
Simply add pre-measured, color coded Reset CLO₂ Tablets to water and ANY UNIVERSAL SIZE opaque container or dispersion tool to generate desired concentration or application requirement.
Apply Reset (M) 100ppm or (H) 500ppm liquid into the atmosphere and onto all porous & non-porous surfaces with a mop, sponge, pump sprayer or non-thermal fogger.
Step 1 is often not required when using Reset Vapor Mold/Smoke/Trauma Removal Level.
STEP 2: Reset Environment & Its Contents with ClO₂ Vapor
3 to 24 hours treatment time depending on severity of issue
Create a confined space. Select Reset Usage Level.
Use (M) Deodorization Level to reset to neutral any environment & its contents from wide-spectrum pungent & resistant odors.
Use (H) Mold/Smoke/Trauma Removal Level for extreme issues. We do not recommend using Reset Vapor (H) Level for any content (clothes/furniture/uniforms/equipment etc.) odor removal, as fading can occur.
Simply add pre-measured, color coded Reset CLO₂ Tablets to water and either a 1 gallon pail or 5 gallon bucket (with Aerator).
Follow easy to understand product Vapor activation instructions and support videos.
STEP 3: Re-Occupy Space
Open windows and doors to air-out CLO₂ from the confined space before re-occupying if using the Vapor protocol.
Pour residual Vapor concentrate down toilet or drain.
